Brocade Communications Systems Inc. began priming the 8 Gbps pump today with the revelation that it has shipped 8 Gbit blades for its SilkWorm 48000 directors to its OEM storage partners for qualification.
What Brocade isn't discussing yet is a new director, code-named Neptune, which uses the same 8 Gbit blades and will become the flagship of its storage area network (SAN) and data center product line. Although Brocade executives aren't ready to discuss the new switch yet, industry sources said it is also being certified by Brocade partners, such as EMC Corp., Hewlett-Packard Co. (HP) and IBM. The 8 Gbit Silkworm blades and the new director are expected to ship by mid-2008.
Continue Reading This Article
Enjoy this article as well as all of our content, including E-Guides, news, tips and more.
Brocade will build in fabric services such as quality of service, virtualization, per-port routing, encryption and data protection on intelligent blades, although not every feature will be available when the director begins shipping. Brocade describes Neptune as a "768-port data center fabric core," but that port count comes from trunking two directors. Brocade portrays the director as the key to providing its answer to Cisco's Data Center 3.0 initiative launched a few months ago, consisting of storage and server virtualization and other storage and networking services.
But Neptune won't be announced until later this month. "We're not announcing any new director this week," said a Brocade spokesperson.
This week, Brocade is talking about 16-, 32- and 48-port blades that plug into the SilkWorm 48000 and native interoperability between the 48000, and switches and directors it acquired by gobbling up rival McData last January.
Brocade's 8 Gbit plans are in line with those of host bus adapter (HBA) vendors Emulex Corp. and QLogic Corp., which said they expect storage OEM partners to have their 8 Gbps HBAs in customers' hands by the middle of next year. Brocade is also planning an 8 Gbit series of HBAs that will likely ship in mid-2008. Brocade's major switch rival Cisco has been quiet on 8 Gbit. Cisco didn't market 4 Gbit switches until more than a year after Brocade offered upgrades from 2 Gbit to 4 Gbit.
While Brocade hopes to get the jump on Cisco for customers going from 4 Gbit to 8 Gbit, most observers of the storage industry expect slower adoption of 8 Gbit devices than 4 Gbit for two reasons.
- 8 Gbit switches will bring a steeper price premium than 4 Gbit did over 2 Gbit, because they require different optics. (Conservative estimates put the cost of 8 Gbit devices at 15% above 4 Gbit.)
- Many customers are happy with 4 Gbit and will be in no hurry to pay that premium to upgrade.
Drivers for 8 Gbit
Is Brocade premature with its 8 Gbit rollout? "That's the fun question," said Bill Dunmire, Brocade senior product marketing manager. "I think you'll see three drivers of 8 Gbit next year. First, 8 Gbit mainframe support is coming in 2008 and customers who want to move to 8 Gbit mainframes will need 8 Gbit fabric. There's also a pent-up demand for LTO-5 tape drives and 8 Gbit will help people get better performance. The third driver is interswitch links [ISL]. With 8 Gbit you can double the bandwidth reduction for ISLs by 50%."
It remains to be seen if any of those drivers will spur mainstream 8 Gbit adoption. Roger Wilson, systems and networking manager at Mercy Medical Center in Des Moines, Iowa, said he is content at 2 Gbit. And Wilson went through a major SAN upgrade last year, adding Cisco MDS 9509 directors and IBM DS6800 and DS4800 storage systems to replicate his data-intensive Picture Archival and Control System (PACS) images from the main data center to a secondary disaster recovery site.
"At some point, we'll upgrade to 4 Gbit but it's not on our radar at this point," Wilson said. "We're not fully pressed yet at 2 Gbit."